Guide

Hair colour explained: levels, tone, developer and safety

Every hair colour is described by two things: its level (how light or dark, from 1 to 10) and its tone (warm, cool or neutral). The developer strength (10, 20, 30 or 40 volume) decides how much lift you get, and a skin patch test at least 48 hours before every colour service is the basic safety step. This guide explains each idea the way a senior stylist would explain it to a new junior.

25 terms.

The level system: how light or dark a colour is

Level tells you how light or dark a shade is, with 1 as the darkest and 10 as the lightest. Most colour ranges use this scale, but a few use 12 levels or their own numbering, so always read the chart of the range you are using.

Dark hair, at level 1 to 4, is common in India. To reach a blonde or a light brown, that hair has to be lightened first. Each step up the scale means more lift, more time and more care.

Your own eyes and a natural light matter as much as the chart. Check the result against the swatch in daylight, because salon lights change how a shade looks.

Levels in the common 1 to 10 scale (names vary by brand)
LevelNameRoughly means
1BlackThe darkest natural black
2Darkest brownVery dark brown, often looks black in daylight
3Dark brownDeep brown, common natural base
4Medium brownMid brown
5Light brownLight brown
6Dark blondeDark blonde to light brown
7Medium blondeMid blonde
8Light blondeLight blonde
9Very light blondePale blonde
10Lightest blondePalest blonde

Tone and the colour wheel: warm, cool, neutral, ash and gold

Tone is the colour you see in the shade, apart from how light it is. Warm tones lean red, orange or yellow. Cool tones lean blue, green or violet. Neutral sits in between.

WarmRed, orange, yellow, copper
Tones with red, orange or yellow in them. They look rich and sunny. Dark hair that is lightened shows warm tones first.
CoolBlue, green, violet
Tones that take out the warmth. They look sharper and more silvery. They are harder to hold, because the warmth in the hair keeps trying to come back.
NeutralNatural
A balance of warm and cool. It looks like natural hair and is a safe choice for first-time colour clients.
AshBlue or green base, matte
A cool tone made to cancel unwanted red and orange. Ash is not a level. It is a tone that sits on a level, for example level 7 ash blonde.
GoldYellow or yellow-orange base
A warm tone that makes hair look bright and glowing. Gold is often what you see when brown hair is lightened to the middle levels.
Underlying pigmentHidden warmth, underlying tone
Every natural hair colour hides warm pigment. Lightening shows it, going from red to orange to yellow as you lift. This is why dark hair often looks orange before it looks blonde. Exact steps vary by hair and by product.
Colour wheel rule
Opposite colours on the wheel cancel each other. Blue cancels orange. Violet cancels yellow. Green cancels red. Stylists use this to pick a toner for unwanted warmth.

Developer strengths: 10, 20, 30 and 40 volume

Developer is the hydrogen peroxide mixed with the colour or lightener. Its strength, called volume, decides how much lift the mix gives. A higher volume lifts more and is also harder on hair and skin.

The peroxide figures are the standard conversion between volume and percentage, and the lift numbers are a general rule. The real result depends on the hair, the product and the time. Always follow the manufacturer's mixing ratio and timing for the range you use.

Lighteners (bleach) have their own mixing ratio and developer strength. Use the maker's instructions and a strand test before a full head.

Never use a stronger developer just to save time. Faster lifting can mean more damage and more risk of scalp irritation.

Developer volumes, peroxide strength and typical use
VolumePeroxideTypically used for
10 volumeAbout 3%Deposit only, toning, glossing, tone on tone, delicate or already lightened hair
20 volumeAbout 6%The usual choice for permanent colour, grey coverage and lifting about one to two levels
30 volumeAbout 9%More lift, up to about three levels, on healthy hair
40 volumeAbout 12%Maximum lift with high-lift colour, used with care and often kept away from the scalp

Permanent, demi-permanent and semi-permanent colour

The main difference is how long colour lasts and whether it can lift your natural shade. Permanent colour can lift and lasts until the hair grows out. Demi and semi-permanent colours fade over washes and do not lift.

Some semi-permanent and demi-permanent products also carry skin-allergy warnings. Check the label and the maker's instructions, and do not assume a gentler product needs no patch test.

Permanent colourOxidative colour
Mixed with developer, it opens the hair and sets colour inside. It can lift your natural shade and covers grey best. It needs regrowth touch-ups. Many permanent colours contain PPD or a similar dye ingredient, which is why the patch test matters.
Demi-permanent colourDeposit only colour
Mixed with a low-strength developer. It deposits colour without lifting, blends grey, and fades gradually over several weeks. Useful for refreshing colour and for toning.
Semi-permanent colourDirect dye, fashion shade
No developer is needed. The colour coats the outside of the hair and washes out over a number of shampoos. Good for trying a shade, or for bright fashion colours on pre-lightened hair. It does not cover grey well.

Global colour, root touch-up and highlights

These three names describe where colour goes on the head. Global colour covers all the hair. A root touch-up covers only new growth. Highlights lighten selected strands.

Global colourAll-over colour, full head
One shade from root to end. When the client is going darker, or changing tone, it is the simplest service. When going lighter, most stylists lift first.
Root touch-upRegrowth colour, root colour
Colour applied only to the new growth at the roots, usually when it shows. Keep fresh colour off the already coloured lengths unless you plan to refresh them, because repeated overlap can cause dryness and banding.
HighlightsFoils, streaks
Selected strands are lightened, usually in foils. Fine, small sections look softer and larger sections look bolder. Strands can be lightened and then toned.
Lowlights
Selected strands are coloured darker than the base to add depth.

Balayage, ombré and babylights

These are placement techniques. They decide where the lightener goes, so the grow-out looks soft. The names are used loosely across salons, so agree the look with the client using photos.

BalayageHair painting, freehand highlights
Lightener is painted by hand onto sections, usually heavier toward the ends. The result is a soft, sun-kissed grow-out with little visible line at the roots. It needs skill and time, so quote enough time in the appointment.
OmbréDip dye, gradient
Hair moves from a darker root to a lighter end with a clear blend between. It is a stronger, more visible effect than balayage. Some salons use ombré and balayage for the same look, so describe what you will do.
BabylightsMicro highlights
Very fine, delicate highlights that mimic the light, natural streaks young children's hair gets from the sun. They take longer to place, and the result is subtle and blended.

Toner and gloss: finishing a colour

Toner and gloss change the tone and shine of already coloured or lightened hair. They do not lift. They are the finishing step that moves yellow or orange hair to the shade the client wanted.

Toner
A gentle colour, usually deposit only, that adjusts tone after lightening. It cancels unwanted yellow, orange or red. Toner fades with washes, so clients may need a refresh in some weeks. How soon depends on the hair and the aftercare.
GlossingGloss treatment, colour gloss
A low-strength, usually transparent or sheer colour service that adds shine and refreshes tone. It is a good in-between service when the full colour is not due.

Pre-lightening and colour correction

Pre-lightening raises the hair to a lighter level before colour is applied. Colour correction fixes a result that did not turn out as planned. Both take time and need an honest chat about what is possible in one visit.

Test a strand first on any big change, and tell the client plainly when a goal needs two or more visits. Clients forgive honesty far more easily than damaged hair.

Pre-lighteningBleaching, lifting, decolourising
Lightener removes natural pigment so a fashion or blonde shade shows true. Dark Indian hair often needs more than one session to reach a pale blonde safely. Spacing sessions out protects the hair.
Colour correctionColour fix, corrective colour
Changing a colour that is too dark, brassy, uneven, patchy or the wrong tone. It may involve lightening, toning or filling colour back in. It is a longer service and the price and time should be agreed before you start.
FillingColour filler
Putting warm pigment back into over-lightened hair before applying a darker colour, so the new colour does not turn out dull or green. Useful in corrections.

Grey coverage

Grey hair has no pigment, so it resists colour more than pigmented hair. Permanent colour with a natural, neutral base covers grey best. Fashion shades and very cool tones may leave grey looking sheer.

For resistant grey, many stylists choose a shade with a natural or neutral base and 20 volume developer, and leave it for the full time on the manufacturer's chart. Some also pre-soften or pre-pigment stubborn grey. Methods differ, so use the ones your range recommends.

How much grey the client has (for example a few strands or mostly grey) changes the choice of shade and the mix. Ask the client and look at the head before you decide.

Regrowth shows sooner on grey hair, so tell clients that touch-ups are a regular job and plan the next date before they leave. See the client consultation form for the questions worth asking before every colour.

Safety: the allergy alert and the 48 hour patch test

Hair colour can cause allergic reactions, and some are serious. The standard step is a skin or strand patch test at least 48 hours before the colour service, for every client, every time. Keep a written record of it.

The UK's NHS advises testing the dye on a strand of hair at least 48 hours before you want to use it, and says symptoms can take up to 72 hours to appear. It names PPD (paraphenylenediamine), found in many permanent and some semi-permanent dyes, as a chemical known to irritate skin or cause allergic reactions. See the NHS guidance on hair dye reactions.

The US FDA also advises a skin test before every use. It adds that a negative result does not guarantee safety, and that a client who dyed their hair many times before without a problem can still react later. See the FDA page on hair dyes.

Practice varies. Some manufacturers write their own test steps on the pack, and local rules differ, so follow the maker's instructions for the range you use. Ask about earlier reactions during the consultation, and about black henna tattoos, which the NHS notes can contain high levels of PPD and raise the chance of a reaction to hair dye.

Patch test, step by step
Apply a small amount of the mixed colour to the area the maker recommends, as per the instructions. Leave it as the maker's instructions say. Check the skin at 48 hours and watch for up to 72. If there is redness, itching, swelling or blistering, do not colour. Record the date, product and result.
When to stop
During the service, stop and rinse at once if the client reports burning, intense itching or swelling. Swelling of the face, lips or throat, a tight throat or trouble breathing is an emergency, so call 112 in India and get medical help immediately.
Other safety basics
Wear gloves, do not colour over broken or irritated skin, and never mix products or developers unless the maker says you can. Keep the area ventilated and follow the label for processing time.

Aftercare: keeping colour bright and hair healthy

Good aftercare makes colour last longer and keeps hair in better shape. Most of it is simple advice that you can give at the front desk.

Wait before the first wash, as advised for the product used, since colour keeps settling after the service. Use a shampoo and conditioner made for coloured hair, and wash with lukewarm rather than very hot water.

Heat styling, sun and chlorine fade colour and dry out lightened hair. Suggest a heat protector, a regular conditioning mask and a trim. Lightened hair needs more moisture and bond-care than natural hair.

Fix the next appointment at the desk before the client leaves. Roots, toner and gloss each have their own timing, and a booking made on the spot beats a reminder to call later. A salon booking software calendar can hold the next appointment so the front desk never loses it.

New to the jargon? Our salon glossary explains more terms.

Questions

What do hair colour levels 1 to 10 mean?

Levels show how light or dark a shade is. Level 1 is black and level 10 is the lightest blonde. Levels 2 to 4 are browns, 5 to 6 are light brown to dark blonde, and 7 to 10 are blondes. Some ranges use other scales, so check the chart of your range.

Which developer volume should I use for grey coverage?

Many stylists use 20 volume for permanent colour and grey coverage. 10 volume is for deposit only and toning, and 30 or 40 volume give more lift. The right choice depends on the range, so follow the maker's mixing ratio.

What is the difference between balayage and ombré?

Balayage is hand-painted, soft and blended, so the grow-out looks natural. Ombré moves clearly from a darker root to a lighter end. Some salons use the two names for the same look, so confirm the result with a photo.

Is a patch test needed every time?

Yes. Both the NHS and the FDA advise a skin or strand test before every use, because an allergy can develop even in someone who has coloured their hair many times. The NHS says to test at least 48 hours before, and a reaction can take up to 72 hours to appear.

What is PPD in hair colour?

PPD is paraphenylenediamine, a dye chemical found in many permanent and some semi-permanent hair colours. The NHS says it is known to irritate skin or cause allergic reactions. Check the product label for it and run the patch test.

Why does dark hair turn orange when lightened?

Dark hair has warm red and orange pigment underneath that shows as the hair lifts. A toner in the opposite tone, usually blue or violet based, cancels it. Deeper hair may need more than one session to get to a clean blonde.

Sources

  1. NHS: Hair dye reactions
  2. US FDA: Hair dyes
Book a demo

See Zespa with your own salon in mind.

On your phone or laptop, with your services, your team and your busiest day.

  1. 1We call or WhatsApp you to fix a time.
  2. 2A short walkthrough with your own services and team.
  3. 3Start free whenever you are ready. No card needed.
1. You2. Your salon

Who should we call?