Guide

Haircut names: women's and men's haircuts explained

A haircut name describes a shape and a length, such as a bob that ends at the jaw or a fade that starts short at the sides. Names vary from salon to salon, so use the name together with a length and a photo. This is a plain-words guide with no pictures, written for clients choosing a cut and for salon owners writing a menu.

27 terms.

How do you describe a haircut?

Describe the length, the shape and the fringe, then show a photo, because a name alone is read differently by every stylist.

Say four things. First, your length now and the length you want. Second, where the shortest layer should fall, for example at the chin or at the collarbone. Third, whether you want a fringe or not. Fourth, how you style your hair every day, for example air dry, blow dry or tie it back.

Staff can use the same four questions at the chair before picking up the scissors. It takes under a minute and saves a re-cut. For treatments and colour words, see the salon glossary and the hair colour guide.

What are the women's haircut names by length?

Women's cuts are most easily named by where the hair ends: above the ears, at the jaw, at the shoulder or below. Salons use some of these names differently, so confirm with a photo.

Pixie cut
A very short cut, with hair cropped close at the sides and back and a little longer on top. Ask how short the sides and the nape should go.
Bob
A cut that ends around the jaw or chin, usually in one clean line. Versions include the classic bob, the A-line bob (shorter at the back, longer at the front), the inverted bob (shorter at the back and stacked) and the long bob.
Long bobLob
A bob that ends between the chin and the shoulder. Some salons use "lob" for any bob that touches the shoulder, so give a length in inches or fingers.
Shoulder-length cut
Hair that ends where it meets the shoulder. It can be one length or layered, so say which.
Long one-length cutStraight cut, blunt cut
Long hair cut to a single length with no layers. A blunt cut means the ends are cut straight across, so they look thick and clean.

What is the difference between a layer cut, step cut, U cut and V cut?

A layer cut keeps hair at different lengths for movement. Step, feather, U and V cuts are different ways of shaping those layers or the back hemline. Clients use these names loosely, so ask what they picture.

Same idea, different names (how salons commonly use the words)
NameWhat it describesWhat to confirm
Layer cutHair kept at different lengths so it moves and looks fullerWhere the first layer starts
Step cutLayers that show as visible steps, usually at the front or sidesHow sharp the steps should look
Feather cutSoft, light layers with wispy endsHow much to remove from the ends
U cutBack hemline cut in a curve, like the letter UHow deep the curve goes
V cutBack hemline cut to a point in the centre, like the letter VHow long the point should be
Layer cut
A cut where hair is kept at different lengths to add movement. Long layers start low and keep most of the length. Short layers start higher and change the shape more.
Step cut
A layered cut where the layers are clearly visible as steps. Compared with a soft layer cut, the steps are easier to see.
Feather cut
A softly layered cut with light, wispy ends. The word is used for different amounts of layering, so show a photo.
U cut
A cut where the back hem forms a gentle curve, longest in the middle and shorter at the sides. It is a hemline shape and can be done on layered or one-length hair.
V cut
A cut where the back hem forms a point in the middle, so the centre is longest. Ask how steep the V should be, because it can range from subtle to sharp.
Face-framing layers
Layers around the face, usually starting near the chin or cheek. They can be added to a long cut without shortening the rest.
Shag
A cut with lots of choppy layers all over, often with a fringe. It is a strong shape, so ask how much length can go.

What are the types of fringe or bangs?

A fringe, also called bangs, is hair cut short across the forehead. The type depends on how long, how thick and which way it falls.

A fringe is a small, quick service, so many salons list a fringe trim on its own. Ask your stylist how often your fringe will need a trim.

Blunt fringe
A thick, straight-across fringe. It needs regular tidying because the edge shows quickly.
Side-swept fringe
A longer fringe that falls to one side and blends into the rest of the hair.
Curtain fringe
A fringe parted in the middle and swept to both sides, like curtains.
Wispy fringe
A thin, light fringe that lets some forehead show through.
Micro fringe
A very short fringe above the brows. Ask the stylist to show the length against your forehead before cutting.

What are the men's haircut names?

Men's cuts are mostly named by how short the sides are and what is left on top. The words "gents cut" and "regular cut" mean different things in different salons, so describe the length instead.

If you run a gents section, see barbershop software for how Zespa fits a barbershop.

Buzz cut
All hair clipped to one short length with a clipper guard. Ask for the guard number or the length.
Crew cut
Short at the sides and back, with the top a little longer and cut short enough to stand or lie flat.
Short back and sides
A classic cut with the back and sides cut short and the top left longer. It may be done with scissors, clippers or both.
Taper
Hair gets shorter gradually towards the neckline and around the ears, but the shortest part is not cut down to the skin as in a skin fade.
Undercut
Sides and back cut very short, with a clear change to a longer top. The top stays much longer than the sides.
Pompadour
A longer top styled up and back from the forehead, with shorter sides.
Quiff
A longer top styled upwards at the front. It is similar to a pompadour but usually less tall.
Side partClassic cut
A neat cut with a clear parting on one side and the hair combed across.
Slick back
Longer hair on top combed straight back, often with some product.
Textured crop
A short, choppy top, often with a short fringe, and shorter sides.

What are the types of fade haircut?

A fade blends hair from short at the sides and neck to longer on top, and the name says how high the short part starts.

A taper and a fade are close cousins. A taper changes length more gently and often stays at the neckline and ears. A fade blends further up the sides. Some salons use the two words as the same thing, so ask for the length at the sides.

Fades are clipper work, so ask which guard numbers will be used and where the shortest part will be. Clean, close work needs a trained hand.

Types of fade by where the shortest part starts
FadeWhere it startsWhat it needs
Low fadeJust above the ear and along the necklineClipper blending around the ears and neck
Mid fadeAround the middle of the sides, above the earSmooth blending across the sides
High fadeHigh on the sides, near the templeCareful blending, since the change is easy to see
Skin fadeCut down to the skin at the shortest pointA trimmer or razor at the lowest part
Taper fadeShort at the neck and around the ears onlyLight, neat clipper work with a short change
Drop fadeCurves down behind the ear towards the neckA curved line that follows the head

How do you ask for a men's or women's haircut?

Ask with a length, a shape and a photo, in that order. The examples below are invented wording only, to show the pattern.

For example, a woman might say: "Take two inches off, keep the layers starting from the chin, and add a side-swept fringe." A man might say: "Short on the sides with a mid fade, about two fingers of length on top, natural neckline."

Before you leave, check three things: the length at the back, the length at the front and how the fringe will fall. If the stylist is unsure, ask for a small cut first. You can always take more off, but you cannot put it back.

A photo helps, but hair type matters too. Straight, wavy and curly hair sit differently with the same cut. Ask your stylist how the cut will look on your hair, not only on the photo.

How should a salon owner name haircuts on the menu?

Use the names your clients say, list what each includes (wash, blow dry, finish) and keep one name per cut.

Write what the price covers next to each name, so the bill matches the service. If two names mean the same cut in your salon, pick one and mention the other in brackets. Separate lines for a fringe trim, a beard trim and add-ons keep the menu easy to read.

To work out prices, see how to price salon services and the free rate card maker. Zespa is salon management software for salons, beauty parlours, spas and skin clinics in India, and it keeps your service list in one place. See beauty parlour software.

Questions

What is the difference between a layer cut and a step cut?

A layer cut keeps hair at different lengths so it moves and looks fuller, and the layers blend softly. A step cut has layers that show as visible steps, usually at the front or sides. Many clients use the two names for the same thing, so confirm with a photo.

What is a U cut and a V cut?

Both describe the shape of the back hemline. A U cut curves gently, longest in the middle. A V cut forms a point in the middle. Ask the stylist how deep the curve or point should be.

What is a bob and a lob?

A bob ends around the jaw or chin, usually in a clean line. A lob, or long bob, ends between the chin and the shoulder. Salons use the names a little differently, so give a length too.

What are the types of fade haircut?

Common fades are low, mid, high, skin, taper and drop. The name says where the shortest part starts and how it is blended. Ask which guard numbers will be used and where the short part will end.

What is a taper and what is a fade?

A taper gets shorter gradually towards the neckline and ears. A fade blends further up the sides and can go down to the skin. Some salons use the words as one, so ask for the length at the sides.

How do I ask my stylist for the haircut I want?

Say your length now and the length you want, where the shortest layer should fall, whether you want a fringe, and how you style your hair. Then show a photo. Names alone are read differently by every stylist.

How often should I get a haircut?

It depends on the cut and your hair. Ask your stylist how long your cut will hold its shape.

Book a demo

See Zespa with your own salon in mind.

On your phone or laptop, with your services, your team and your busiest day.

  1. 1We call or WhatsApp you to fix a time.
  2. 2A short walkthrough with your own services and team.
  3. 3Start free whenever you are ready. No card needed.
1. You2. Your salon

Who should we call?